The Disappearing Nine Patch ( often abbreviated D9P) is a quick and easy quilt to make,
though when it is finished it looks quite complex. This tutorial will explore
the steps in making this quilt.
Step 1: Choosing Your Fabrics
For this quilt, you can use as few as three fabrics for a
controlled pattern, or as many as hundreds for a completely scrappy look—it’s
all up to you. For this tutorial, I’ll be using ten fabrics as shown below:
Each of the fabrics with the circle print has a coordinate.
The black with white dots (upper left) will be a constant in each block, and
the black and white houndstooth (bottom left) will be a border. I’ll choose the
binding and backing materials after the quilt top is done; I like to audition
them with the actual quilt to see what I like best.
Step Two: Cut Your Fabrics
For this quilt I cut 5” squares of everything but the border
fabric to make my 9-patches. In each 9-patch, I used four of the circle print,
four of its coordinating print, and one of the black and white dots. Determine
the size you want your quilt to be to figure out how many of each you need to
make.
For example, the final block (after sewing, cutting, and
re-sewing) for this quilt finishes at 12 ½” square. If I decided to make my
quilt 6 blocks wide (75”) by 8 blocks long (100”), I would need to make 48
blocks in total. Since I have four sets of circles and coordinating fabrics
(red, green, yellow, and blue), I would make 12 blocks of each color
combination. Each block needs 4 circle print squares, 4 coordinating print
squares, and one black and white dot square. Therefore, I will need 48 squares
of each color of the circle print (192 total), 48 of each coordinating fabric
(192 total), and 48 squares of the black and white dot (48 total). If you are
using more colors, or want your quilt a different size, you would figure this
out in the same way.
# total blocks x 4 = number of squares to cut of focus
fabric (green in diagram)
# of blocks x 4 = number of squares to cut of coordinating
fabric (yellow in diagram)
# of blocks = number of squares to cut of center
fabric (red in diagram)
Step 3: Assembling the Nine Patch
A Nine Patch is easy to assemble; it’s just three rows of three
blocks each. Using a ¼” seam, assemble each block as indicated in the diagram.
Be sure to put the focus fabric at the corners since these squares won’t be
sub-cut. The center square will be a constant in each block. When pressing
seams, they should go away from the coordinating fabric (yellow above). Doing
this will ensure that your seams will nest when sewing the rows together.
Step 4: Sub-cutting the Nine Patch
You’re probably thinking, “But I just sewed it together—what
do you mean sub-cut?” This is the “disappearing” part of the Disappearing Nine Patch.
Measure your Nine Patch to determine the center of your center
row:
Cut vertically in half. Turn your ruler to cut
the horizontal center:
Here is your sub-cut block:
Step 5: Rearrange your sub-cut blocks
There are many ways to arrange your sub-cut blocks.
You can keep your colors together or mix them up. You can turn the blocks to
form a sashed look or create a mini-chain with the smallest square of fabric in
the blocks:
I decided to go with this third option.
Step 6: Reassemble the sub-cut blocks
Easy step…sew the four sub-cut blocks together. Sew
the top two blocks together; press the seam away from the smallest center block
(in my photo, the black and white dots). Sew the bottom two together; again,
press away from the smallest block. This will cause your center seams to nest as
you sew the two halves (top and bottom) together.
Voila! Your block is done.
Step 7: Assemble your quilt top
You will sew your blocks together in rows next. I chose to
keep my blocks in the same order (red and blue at the top) when assembling my
rows. In this way, I have the small center blocks (the black and white dots) in
pairs (see the center of the block above) all over the quilt. However, lay your
blocks out to see if you prefer them to be arranged differently. Sew the rows
(horizontal) together, one to the next, until you reach your planned width.
Repeat until you have the number of rows you have planned for the length of
your quilt.
Next, sew the rows together, carefully matching your seams.
Pinning can really help you here—when a seam needs to match, align it and pin,
removing the pins as you come to them on your sewing machine. I like to sew the
rows together in pairs, then sew the pairs together. This means you have less
fabric to work with at a time—the whole thing can get pretty bulky before you
are done.
Step 8: Attach borders
You may skip this step if you like the quilt as is. I
tend to like borders, so I will audition the fabric to decide on the border’s
width. You can add as many as you wish. I like a “stop” border—a narrow piece of
fabric that frames the top and provides a clear visual end to the pattern.
Often, I’ll follow this with another decorative border.
First border attached.
Second border attached.
Step 9: Layer your quilt
Choose your backing. I decided to go with blue.
You may need to piece your backing unless you buy extra-wide fabric for it.
I glue baste my quilts with Elmer’s Washable School Glue.
To do this—first check that everything is the right
size. Your backing and batting should be a bit larger than your top.
Lay your batting out flat. Drizzle glue on the
batting, then smooth your backing over it. It is hard to see in this picture,
but think of the glue as pin basting—the whole surface doesn’t have to be
covered. I only have a small surface, so I have to do it in parts, but if you
have a large enough flat surface, do about half at a time, so it doesn’t get
too unwieldy. Allow the glue to dry until tacky—an hour or so. Turn it over
carefully and repeat with the top. Be sure to put your glue on the batting
rather than the top—you’ll get a smoother finish.
Here I have the top folded back exposing the
batting for glueing.
Smoothing the top back over the batting after
applying the glue.
I use a ruler first to be sure it is flat and
that the glue and fabric have a good connection.
Check with your hand to ensure everything is
flat and smooth. Let your quilt sandwich dry for a few hours (overnight is
good, if you have the room).
Step 10: Quilt
How you decide to quilt is up to you, You can use stitch in the ditch, a straight line grid, free-motion quilting,...there are many choices. Since quilting is a complicated process on its own, I'm not going to try to cover it here. There are many books and websites devoted to the topic.
Step 11: Bind the Quilt
The last step is binding the quilt. Again, there are many books and tutorials which cover this process thoroughly. Choose a binding fabric which complements your quilt top. I decided to repeat the black from the narrow inner border.
Step 12: Finished!
Be sure to take a picture of your quilt for documentation and to share with others.
Here is mine:
This is a fun project that is suitable for beginning quilters. The end result looks intricate and complicated, but, as I have demonstrated, the technique is composed of easy steps.
Have fun making your own Disappearing Nine Patch!
